fp210024FP 210/024 - 10/100/1000 Unmanaged Ethernet Switch Board

The FP 210/024 is an entry-level 24-port 10/100/1000Mbps Ethernet Switch Board for use in a standard VME backplane. It supports up to twelve front panel connections and twelve connections to the rear. It offers high speed, full line rate Layer 2 switching fabric on all Ethernet ports. Quality of Service (QoS) operation is supported with four priority queues and a variety of traffic classes for time-critical and multimedia traffic. Switch configuration and control is provided via a front panel RS232 port. Options to operate in temperatures ranging from -40°C to +85°C are available. Ruggedized conduction-cooled and ruggedized air-cooled versions are planned.

postbullets

pdf-icon

 

fx3220xx whiteFX 322/0xx - VXS Switch Board - PCI Express (VITA 41.4) and Ethernet (VITA 41.6)

The FX 322/0xx is a Gen1/Gen2, 4-Lane PCI Express®Switch Board for use in VXS VITA 41.4 Switched Serial Backplane environments. The FX 322/0xx provides a data plane with up to eighteen x4 PCI Express payload boards, a control plane with up to eighteen 1000-Base-BX ports (as per VITA 41.6) and an inter-switch interface. This VXS fabric switch gives the end-user higher bandwidth and lower latency while maintaining backward compatibility within a VME ecosystem. The PCI Express and Gigabit Ethernet fabrics provide switching for a dual star topology allowing boards within the system to communicate. The Ethernet fabric also enables interconnection between legacy VME boards. Options for extended temperature boards or ruggedized boards are available.

postbullets

pdf-icon

 

fx21001xFX 210/01x - 1000Mbps (IEEE 802.3) VITA 41.3 Ethernet Switch Board

The FX 210/01x is an entry-level 1000Mbps baseband IEEE 802.3 Switch Board for use in VXS VITA 41.3 Switched Serial Backplane environments. It supports up to eighteen payload boards, an inter-switch port for linking to a second switch, and for user connections, up to four front panel Ethernet interfaces. It offers high speed, full line rate Layer 2 switching fabric on all ports. Quality of Service (QoS) operation is supported with four priority queues and a variety of traffic classes for time-critical and multimedia traffic.

postbullets

pdf-icon

 

fp110019-rcFP 110/019-RC - 10/100/1000 Ethernet Switched Fabric Board, Rugged Conduction-Cooled

The FP 110/019-RC is an entry-level 24-port 10/100/1000Mbps ruggedized conduction-cooled Ethernet Switched Fabric Board for use in PICMG® 2.16 and VITA 31.1 Packet Switched Backplane environments. It supports up to nineteen node boards and a fabric to fabric link. It offers high speed, full line rate Layer 2 switching fabric on all Ethernet ports. Quality of Service (QoS) operation is supported with four priority queues and a variety of traffic classes for time-critical and multimedia traffic. System monitoring is provided by the PICMG 2.9 compliant IPMI subsystem, supporting the IPMB0 serial management bus. The board operates in temperatures ranging from -40°C to +85°C. Commercial air-cooled versions are available and ruggedized air-cooled versions are planned.

postbullets

pdf-icon

 

line

Subscribe and recive our newslatter

line

map

iso

Contact Details

EPS-Tech Ltd.

Industrial park, Tzur-Igal
2 Bazelet St,

Israel, 44862

Tel: +972-9-749-8585
Fax: +972-9-749-8686
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.